How to make shoes: Single cut pattern for high heel pumps

In this shoe making tutorial, you will get a full guide on How to make Single cut pattern for high heel pumps. The high heels pump shoes are one of the most beautiful shoe types, if the pattern is made correctly., especially, the neckline. The complexity is in the preciseness of the throat and sidelines. So to emphasize the beauty if the feet curves the pattern of the high heels pump shoes must be done well. There are few shoemaking techniques to make the pattern and here I am sharing with you one of the best pattern making techniques on how to make high heels pump shoe pattern by making the single cut pattern: 1) For this basic pattern, earlier prepared, placed on a piece of cardboard on a straight line drawn in advance. Find the lowest point of the neckline and mark it symmetrically on both sides of the pattern. In the video, the points A and A1. Transfer the first line pattern in front and to the points. Then, with an awl puncture point A, move the back of the pattern so that from the top of the heel to the center line on the cardboard was a distance of 4 mm, was to make extra for the folding pattern in the top. Do the same with the inside of the pattern through the point A1. Gently combine the resulting new lines of the pattern. Bend the cardboard in half along the center line, cut the heel line and 1 mm at the beginning of sideline. This will avoid the error in transferring line in the heel. It turns out, as it should be symmetrical on the outside and inside of the p