How To Shorten Nails With An Efile [ BONUS EFILE MUST-KNOW TIPS]

How To Shorten Nails With An Efile [ BONUS EFILE MUST-KNOW TIPS] 🔺My Favorite Efile Machines & Implements Guide https://paolaponcenails.com/efilefaves 🔺My Efficient Efile Manicurist Course https://paolaponcenails.com/efilecourse 🔺My Favorite Efile Implements & Bits Source https://paolaponcenails.com/nashlynails (Code PPN10) 🔺MELODYSUSIE https://paolaponcenails.com/melody 🔺My Other Efile Videos (includes video mentioned) https://www.youtube.com/playlist?list=PLrHjxFtooLZPxzd677N4zP-qMJDAlROsZ Ok… now as far as our tools today. We’ll definitely need an efile, a dust collector (… this is always a non-negotiable at the nail table), and also a carbide bit and a couple of hand files. Now I got a little lazy, and just worked with the efile handpiece on my Melodysusie dust collector. It was fine, but the torque was a little lower for this kind of job, I should have used my professional Nail Labo. I find the Melodysusie brand a bit DIY, entry level quality, but it’s a good start… again it did the job. OK, next you’ll need a carbide bit. For shortening length you don't want too fine, so try a medium or even a coarse if you're comfortable. My favorite source for efile bits is from Nashlynails.com as they source Eastern European high end manicure tools, and I’ll go ahead and link you down in the description box below to check them out for yourself. So dust collector, efile, and carbide bit, the last item we need is a hand file or 2. I’m going to use both a 180 grit and a 150